Product name
Anti-vibration rubber for unit bath
model number
- YUB-90
special characteristic
- The thickness of the anti-vibration rubber is as thin as 23mm
- Can also be used for low-floor unit baths.
Product Overview
forte
- The shape of the side of the anti-vibration rubber is special.
- Even when the anti-vibration rubber contacts the wall, the sides are inflated to avoid metal contact and reduce vibration transmission.
- Suppresses deflection due to variable loads
- The special structure ensures anti-vibration performance while maintaining the value stipulated by the unit bath manufacturer: a deflection difference of 2 mm or less in the rubber against load fluctuation (1,600 N).
(technical) specification
Example of Construction
- range of use
When the bathtub is filled with water, the allowable load of the anti-vibration rubber should not be exceeded. - Installation method
The top side of the anti-vibration rubber is fixed by adhesion to the unit bath column leg support material.
The underside of the anti-vibration rubber is fixed with adhesion to the slab surface of the frame. - requirement
The ambient temperature for installation should be less than 60°C (140°F).
Please take care to avoid contact with oil and solvents.
Please do not use two layers of anti-vibration rubber, as this will increase the shaking and cause malfunctions.
